 Last additions |
251-34161 viewsBing Siding, BHP ballast waggon 509 sits in a dead end siding very much unloved. View of the ballast discharge chutes and the manual handle. Originally an ore waggon and built by Magor USA and was one of the original fleet of waggons to come out to WA with the car dumper at the beginning of the Mt Newman project. 22nd April 2000.Nov 12, 2020
|
|
251-33273 viewsBing Siding, BHP ballast waggon 509 sits in a dead end siding very much unloved. Originally an ore waggon and built by Magor USA and was one of the original fleet of waggons to come out to WA with the car dumper at the beginning of the Mt Newman project. 22nd April 2000.Nov 12, 2020
|
|
251-32236 viewsNelson Point, the final ALCo on the BHP roster, 5499 sits stored pending its future. Built by Comeng NSW in November 1975 as an ALCo M636 with serial number C6096-04. The unit was intended to be donated to Thursday Island, but this didn't eventuate due to logistical reasons. It is now at the Rail Heritage WA museum in Bassendean. 22nd April 2000.Nov 12, 2020
|
|
251-31400 viewsNelson Point, the final ALCo on the BHP roster, 5499 sits stored pending its future. Built by Comeng NSW in November 1975 as an ALCo M636 with serial number C6096-04. The unit was intended to be donated to Thursday Island, but this didn't eventuate due to logistical reasons. It is now at the Rail Heritage WA museum in Bassendean. 22nd April 2000.Nov 12, 2020
|
|
251-30263 viewsNelson Point hard stand area overview sees the CM39-8 model loco 5631, an unidentified flat car and some ore waggons and a compressor set in the distance. 22nd April 2000.Nov 12, 2020
|
|
251-29269 viewsNelson Point hard stand area has the compressor waggon 559 off compressor set 7 and two ballast waggons 534 and 536. All three waggons are modified from the original Oroville Dam ore waggons built by Magor USA. 22nd April 2000.Nov 12, 2020
|
|
251-28144 viewsNelson Point hard stand area, drivers side profile view of BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-27155 viewsNelson Point hard stand area, drivers side cab view of BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-26165 viewsNelson Point hard stand area, view of the pilot and newly installed Leslie 5 chime horn, the original single horn can be seen below it. BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-25146 viewsNelson Point hard stand area, BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-24152 viewsNelson Point hard stand area, BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-23173 viewsNelson Point hard stand area, BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-22169 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-21166 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-20125 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 and yet to be named idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-19170 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 and yet to be named idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-18173 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 and yet to be named idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-17164 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-16169 viewsNelson Point, the South Yard 'prep shed' located on the dumper exit roads 102, 103 and, 104. Goninan GE rebuild unit 5656 a CM40-8M unit with serial number 8412-01 / 94-147 sits on shed with a sister units. This facility was used to service and fuel locomotives while their respective waggon rakes were being tipped through the car dumpers. 22nd April 2000.Nov 12, 2020
|
|
251-15179 viewsNelson Point, the South Yard 'prep shed' located on the dumper exit roads 102, 103 and, 104. This facility was used to service and fuel locomotives while their respective waggon rakes were being tipped through the car dumpers. 22nd April 2000.Nov 12, 2020
|
|
| 16911 files on 846 page(s) |
 |
|
|
|
|
|
|
|
129 | |
|
|
|
|
|
|
|
Login
