 Most viewed - Pilbara negative and digital Albums - Iron Ore |
050704 3994210 viewsBing Siding, empty 116 kL Comeng WA built tank waggon 0016 from 1974-5, one of six such tank waggons, detail of A end and bogie.
|
|
051001 5685210 viewsBoodarie, the Steel Train or rail recovery and transport train, flat waggon #12, 6209, a Comeng WA built flat waggon from January 1977 under order no. 07-M-282 RY.
|
|
051001 5689210 viewsBoodarie, the Steel Train or rail recovery and transport train, flat waggon #14, 6207, a Comeng WA built flat waggon from January 1977 under order no. 07-M-282 RY.
|
|
051001 5732210 viewsBoodarie, the Steel Train or rail recovery and transport train, flat waggon #28, 2nd lead off waggon 6201, built by Comeng WA in January 1977 under order no. 07-M-282 RY, with the Gemco built straddle crane.
|
|
051001 5738210 viewsBoodarie, the Steel Train or rail recovery and transport train, 1st lead off waggon 6011, built by Scotts of Ipswich 04-09-1970, the mesh guarding is for the winch cable. The chute arrangement for the discharging and recovery of rail is visible.
|
|
050525 2951210 viewsMooka Siding, rail recovery and transport train flat waggon #18, builders plate of 6012, built by Scotts of Ipswich Qld on 11-09-1970.
|
|
050724 4310210 viewsBing Siding, empty 116 kL Comeng NSW built tank waggon 0010 from 1972, one of three such tank waggons.
|
|
060501 3896210 viewsTabba Siding, built by Difco USA in 1971 for Mt Newman Mining in a group of four, side dump waggon 702.
|
|
060501 3901210 viewsTabba Siding, originally built by Difco USA for Goldsworthy Mining Ltd in 1967 as a batch of five, prefixed with 870 in BHP service, 8704 side dump waggon loaded with ballast.
|
|
050625 3592210 viewsMooka North, BHP's new Tamper 3 track machine a Plasser Australia 09-3X model serial M480. 25th June 2005.
|
|
060403 3268210 viewsTabba North backtrack, BHP clip driving machine, shows the foot pedals the operators use and basket loaded with rail insulators, modified from a former Plasser Australia USP 3000 ballast regulator. 3rd April 2006.
|
|
060710 6228210 viewsAt the Broome Rd grade crossing Port Hedland, Switch Tamper SW 02 a Plasser Australia model Unimat S4 switch tamper. 10th July 2006.
|
|
060710 6232210 viewsAt the Broome Rd grade crossing Port Hedland, track machine BR 33 a Plasser Australia ballast regulator model SSP 302 serial M486. 10th July 2006.
|
|
110208 9444210 viewsFlash Butt yard, new rail stock carrier waggon 6038 loaded with strings of rail, built by Gemco Rail in late 2009-10 with Barber bogies.
|
|
110411 10002210 viewsNelson Point, empty 116 kL Comeng WA built tank waggon 0018 from 1974-5, one of six such tank waggons, wearing the BHP Billiton Earth livery.
|
|
150314 7748210 viewsBing Siding, empty 116 kL CNR-QRRS of China built tank waggon 0027, one of a batch of ten built in 2014.
|
|
150523 8221210 viewsNelson Point, empty 116 kL CNR-QRRS of China built tank waggon 0037, one of a second batch delivered in 2015 with safety slogan 'Safety is a core value'.
|
|
150523 8223210 viewsNelson Point, empty 116 kL CNR-QRRS of China built tank waggon 0037, one of a second batch delivered in 2015 with safety slogan 'Safety is a core value'.
|
|
110602 8648210 viewsRio Tinto compressor waggon set CB 03, compressor control waggon with two diesel powered Atlas Copco XAS 97's behind the loco and the receiver waggon with two air tanks or receivers. Note the waggons are cut down ore waggons. Seen here on the causeway just outside of 7 Mile. 2nd June 2011.
|
|
241-25210 viewsNelson Point, Mt Newman Mining's last in-service ALCo M636 unit 5499 serial C6096-4 built by Comeng NSW sits awaiting partial dismantling before being sent by road to Rail Heritage WA's museum at Bassendean, Perth for preservation. June 2002.
|
|
| 4019 files on 201 page(s) |
 |
|
|
|
|
|
|
|
137 | |
|
|
|
|
|
|
|
Login
