 Most viewed - Pilbara negative and digital Albums - Iron Ore |
050409 0391395 viewsShell Swagman Roadhouse, Lampson eighty wheel float ready to deliver BHP's new mainline tamper a Plasser Australia 09-3X model with serial M480 view of tamper frame and mechanism. 9th April 2005.
|
|
050801 4721395 viewsNelson Point yard, ballast regulator BR 33 a Plasser Australia model SSP 302 unit serial M486. 1st August 2005.
|
|
060710 6228395 viewsAt the Broome Rd grade crossing Port Hedland, Switch Tamper SW 02 a Plasser Australia model Unimat S4 switch tamper. 10th July 2006.
|
|
110606 1752395 viewsFlash Butt yard, CNR-QRRS of China built ballast waggons, 0209 is a 99 tonne bottom discharge and 0711 is an 80 tonne side dump waggon, both built and delivered in early 2011.
|
|
9006 070909 0655395 viewsRobe River compressor waggon 9006 on the lead of a Deepdale rake going through the car dumper at Cape Lambert. Fitted with an Atlas Copco XAS 85 compressor, fuel tank and air receiver. This waggon is a modified Tomlinson Steel built ore waggon. September 9, 2007.
|
|
243-14395 viewsNelson Point departure yard, BHP Billiton's CM39-8 unit 5630 'Zeus' serial 5831-09 / 88-079 and built new by Goninan in the new 'earth' or 'bubble' livery as it trails an empty train waiting departure time. August 2003.
|
|
150619 9091395 viewsFlash Butt yard, Speno owned and operated rail grinder RG2 for BHP, rail grinding module, from the left, water tank, electrical cabinet, blower fans and filter housing, water tank, water tank, electrical cabinet, blower fans and filter housing, fuel tank.
|
|
248-14395 viewsDingo Siding on the Hamersley Iron railway at the 39 km with an empty train headed up by a pair of General Electric built Dash 9-44CW units 7077 serial 47756 from the original first order in the Pepsi Can livery and 9408 serial 54158 from the fourth order in the Pilbara Rail livery with Robe ownership markings powers away to the south back onto the mainline with the signal marker board DI19 for Dingo 19. Approximate location. 24th April 2004.
|
|
248-20395 viewsSeven Mile yard, stored Robe River ALCo locomotives at the south end of the Hamersley Iron Seven Mile yard on roads N2 and N3. On N2 is AE Goodwin built ALCo M636 unit 9412 serial G-6060-3 from December 1971 and originally numbered 262.003 during construction and then 1712 on MLW Dofasco bogies with C636R units 9427 and 9426 on Hi-Ad bogies. Beside it on N3 is 9416 also an AE Goodwin built ALCo M636 serial G-6046-16 from January 1973 and originally numbered 1716 on MLW Dofasco bogies but with a C630 fuel tank in place of the original M636 and larger tank. Approximate location. 24th April 2004.
|
|
251-15395 viewsNelson Point, the South Yard 'prep shed' located on the dumper exit roads 102, 103 and, 104. This facility was used to service and fuel locomotives while their respective waggon rakes were being tipped through the car dumpers. 22nd April 2000.
|
|
221-29394 viewsYandi One mine loadout balloon loop, a pair of General Electric AC6000 units lead a train being loaded around the balloon, overview of the stockpile with stacker fill the hole from loading.
|
|
224-34394 viewsBing siding, the afternoon empty to Yandi was a staple of the AC6000 units when delivered, operating the train as a pair, 112 waggons, AC6000 and 112 waggons. 6076 'Mt Goldsworthy' serial 51068 a General Electric AC6000 built by GE at Erie departs the loop south with sister unit 6073. GeoData.
|
|
235-14394 viewsYandi Two, BHP Iron Ore Goninan rebuild CM40-8M GE unit 5652 'Villanueva' serial 8412-09 / 93-143 passes out the other side of the loadout tunnel as loading has commenced, the dust extraction equipment and retaining wall culvert frame the loco.
|
|
040815 171312394 viewsNelson Point, fuel tank waggon 0020, 82 kilolitre capacity built by Comeng NSW for BP as RTC 2, used by Mt Newman Mining, unsure when converted to 0020.
|
|
050518 2181394 viewsBing Siding. Side view of 1963 built Magor USA waggon 517, one of twenty waggons originally used on the Oroville Dam construction before coming to the Pilbara in January 1968 as ballast waggons.
|
|
050801 4771394 viewsFlash Butt yard, rail recovery and transport train flat waggon #26, 6015, built by Comeng WA in November 1971.
|
|
060501 3870394 viewsTabba Siding, originally built by Difco USA for Goldsworthy Mining Ltd in 1967 as a batch of five, prefixed with 870 in BHP service, 8701 side dump waggon loaded with ballast.
|
|
050407 0382394 viewsNelson Point yard hard stand area sees brand new having only been delivered, BHP track tamper support trailer for Tamper 3 which will arrive in a couple of days. Plasser Australia 09-3X model with serial M480. 7th April 2005.
|
|
050414 0941394 viewsFlash Butt yard, BHP clip driving machine, modified from a former Plasser Australia USP 3000 ballast regulator. 14th April 2005.
|
|
050625 3814394 viewsNode 2 at the 38 km on the GML or former Goldsworthy mainline, two Barclay Mowlem sleeper inserter track machines off clear of the running lines. 25th June 2005.
|
|
| 6096 files on 305 page(s) |
 |
|
|
|
|
|
|
|
99 | |
|
|
|
|
|
|
|
Login
